📋 PM Class A Maintenance Information

Technician Name:

Vehicle/Unit Number:

Current Mileage:

Service Date:

Next Service Due (Miles):

Service Interval:

🔧 PM CLASS A BASIC SAFETY MAINTENANCE

This PM Class A maintenance covers essential safety systems and basic preventive care. Complete all tasks to ensure optimal vehicle performance, reliability, and compliance with International truck maintenance standards.

🛢️ Engine Oil and Filter Service ▼

Drain engine oil completely when engine is warm

Replace oil filter with International approved filter

Install new drain plug with proper torque specification

Fill with recommended International engine oil grade

Check oil level using dipstick after engine warm-up

Reset oil life monitor per International procedures

🌬️ Air Filter System Maintenance ▼

Remove and inspect primary air filter element

Replace if dirty or damaged beyond cleaning

Check air filter housing for cracks or damage

Replace safety element if contaminated

Reset air filter restriction indicator

⛽ Fuel System Basic Service ▼

Drain water from fuel/water separator

Replace fuel filter(s) per service interval

Prime fuel system after filter replacement

Check fuel lines for leaks or damage

Test fuel cap seal and vacuum relief

🌡️ Cooling System Inspection and Service ▼

Check coolant level in expansion tank when cold

Test coolant concentration with refractometer

Inspect radiator fins for debris and damage

Check all hoses for cracks, swelling, or leaks

Test radiator cap pressure rating

🛑 Brake System Basic Maintenance ▼

Inspect brake pads/shoes for minimum thickness

Check brake rotors/drums for scoring or excessive wear

Test air brake system pressure build-up time

Drain moisture from air tanks and reservoirs

Check slack adjusters for proper operation

⚡ Electrical System Basic Service ▼

Test battery voltage and specific gravity

Clean battery terminals and apply protectant

Check alternator belt tension and condition

Test charging system output and regulation

Check all exterior lights for proper operation

🛞 Tire and Wheel Maintenance ▼

Check tire pressure on all tires when cold

Inspect tire tread depth with depth gauge

Check lug nut torque to specification

Rotate tires per International recommendation

🔧 Parts and Materials Used

Documentation Requirement: List all parts, filters, fluids, and materials used during this PM Class A maintenance service.

✍️ Technician Certification

Service Certification: I certify that I have completed all applicable PM Class A maintenance tasks and that the vehicle meets International truck maintenance standards.

Technician Signature:

Click to sign

Service Completion Date:

🌐 Use Digital PM Tracker Online

🔧 PM Class A Basic Safety Maintenance

📋 PM Class A Maintenance Information

🔧 PM CLASS A BASIC SAFETY MAINTENANCE

🔧 Parts and Materials Used

✍️ Technician Certification

✅ PM Class A Maintenance Summary

🛡️ Fleet Maintenance Analysis & Recommendations