Driver Vehicle Inspection Report (DVIR) for International Trucks

Complete this DOT/FMCSA required Driver Vehicle Inspection Report to ensure regulatory compliance and document vehicle condition for International trucks.

DVIR Compliance Information

The Driver Vehicle Inspection Report (DVIR) is a federal requirement under 49 CFR 396.11 and 396.13 for commercial motor vehicles. This inspection must be completed by the driver at the completion of each day's work and covers all safety-relevant vehicle systems. For International trucks, the DVIR ensures compliance with DOT/FMCSA regulations and provides critical documentation for fleet safety and maintenance programs.

DVIR Inspection Procedures for International Trucks

Follow these DOT-compliant DVIR inspection procedures for your International truck to meet federal requirements.

DVIR Service Brakes Inspection

Test service brake pedal reserve and feel
Check for proper brake system response
Verify adequate stopping power during test
Listen for unusual brake noises during application
Check brake pedal linkage security and operation
Inspect brake warning light functionality
Document any brake system deficiencies
Note brake adjustment indicators if visible

DVIR Parking Brake Inspection

Test parking brake holding ability on grade
Check parking brake control mechanism operation
Verify proper engagement and release
Inspect parking brake warning systems
Test parking brake on both level and inclined surfaces
Check for proper parking brake adjustment
Document any parking brake defects found
Verify International truck specific parking brake features

DVIR Steering Mechanism Inspection

Check steering wheel free play (maximum 2 inches)
Test steering wheel return to center after turns
Inspect steering column for security and damage
Check power steering operation and fluid level
Verify steering linkage connections are secure
Test steering response and accuracy
Check for steering gear leaks or damage
Document any International truck steering system issues

DVIR Lighting Devices Inspection

Test headlights (high and low beam)
Check tail lights and running lights
Verify turn signals operate properly (front and rear)
Test brake lights activate with brake application
Check hazard warning lights function
Inspect clearance and marker lights
Verify license plate lights are operational
Test International truck specific lighting features

DVIR Required Component Inspection for International Trucks

Inspect these DOT-required components on your International truck for the Driver Vehicle Inspection Report.

DVIR Tires Inspection

Check tire tread depth (minimum 4/32" front, 2/32" rear)
Inspect tires for cuts, cracks, or bulges
Look for embedded objects in tire treads
Check tire sidewalls for damage or excessive wear
Verify proper tire inflation by visual inspection
Ensure tire sizes match on each axle
Check for separation of tread or sidewall
Document any tire conditions requiring attention

DVIR Wheels and Rims Inspection

Inspect wheels for cracks, damage, or missing parts
Check lug nuts for tightness and proper seating
Verify all lug nuts are present and secure
Look for wheel rim damage or excessive wear
Check for proper wheel alignment
Inspect valve stems and caps
Check for signs of wheel bearing problems
Document any International truck specific wheel issues

DVIR Horn Operation

Test air horn operation (if equipped)
Check electric horn functionality
Verify horn produces adequate sound level
Test horn button/switch operation
Check horn mounting security
Verify horn meets DOT sound requirements
Test horn from driver's seat position
Document any horn system deficiencies

DVIR Windshield and Wipers

Inspect windshield for cracks or damage in driver's view
Check windshield wipers for proper operation
Test wiper blade condition and cleaning effectiveness
Verify windshield washer system functionality
Check for adequate windshield washer fluid
Inspect wiper motor and linkage operation
Test multiple wiper speeds if available
Document any vision-impairing windshield conditions

DVIR Mirrors Inspection

Check driver-side mirror for proper adjustment
Inspect passenger-side mirror adjustment and condition
Verify mirrors provide adequate rear vision
Check mirror mounting security and stability
Inspect mirror glass for cracks or damage
Test remote mirror adjustments if equipped
Check convex mirrors for proper positioning
Document any mirror defects affecting safety

DVIR Coupling Devices (if applicable)

Inspect fifth wheel locking mechanism
Check fifth wheel mounting and security
Verify proper lubrication of fifth wheel plate
Test fifth wheel release handle operation
Check air and electrical connections to trailer
Inspect kingpin area for wear or damage
Verify proper trailer height for coupling
Document any coupling system defects

DVIR Other Required Components

Check emergency equipment (fire extinguisher, warning devices)
Inspect exhaust system for leaks or damage
Verify fuel system integrity and tank security
Check battery and electrical system operation
Inspect frame and body for damage
Test engine performance and warning systems
Check International truck specific safety systems
Document any other safety-related defects

DVIR Documentation Requirements

Complete DVIR form with all required information
Sign and date the inspection report
List all defects found during inspection
Provide detailed description of any defects
Submit DVIR to motor carrier as required
Retain copy of DVIR for required retention period
Ensure next driver reviews DVIR before operation
Follow up on any required repairs or corrections

Use Digital DVIR Online