Interactive Electrical & Lighting Systems Inspection Form for International Trucks

Complete this interactive digital electrical systems and lighting inspection form with real-time validation and automated reporting for International truck compliance.

Interactive Electrical & Lighting Inspection Information

This interactive electrical systems and lighting inspection form provides real-time validation, automatic calculations, and digital documentation for International truck electrical safety inspections. The form meets DOT requirements, generates instant reports, tracks defects automatically, and integrates with fleet management systems for comprehensive electrical system maintenance tracking.

Vehicle and Inspector Information

Inspector Name:

Inspection Date:

Vehicle Identification (VIN):

Truck Unit Number:

Odometer Reading:

International Truck Model:

Interactive Electrical & Lighting Systems Inspection

Click Pass/Fail/N/A for each inspection item. Failed items will automatically prompt for defect description.

Inspection Progress

Total Items

Passed

Failed

Complete

Battery and Charging System

Battery voltage test (12.6V+ at rest)
Battery terminals clean and tight
Alternator output test (13.8-14.4V)
Alternator belt condition and tension
Starter motor operation test

Headlight System

Low beam headlights operation (both sides)
High beam headlights operation (both sides)
Headlight alignment and aim
Headlight lenses condition
Headlight switch operation

Turn Signal and Hazard Lights

Left turn signals (front and rear)
Right turn signals (front and rear)
Turn signal flash rate (60-120 per minute)
Hazard warning lights operation
Dashboard indicator lights

Tail Lights and Brake Lights

Tail lights operation (both sides)
Brake lights activation with pedal
Center high-mounted stop lamp (CHMSL)
Tail light lenses condition

Clearance and Marker Lights

Front clearance lights (amber)
Rear clearance lights (red)
Side marker lights operation
Identification lights on cab roof
Reflector condition and cleanliness

Wiring and Connections

Main wiring harness condition
Electrical connectors secure and clean
Ground connections secure
Wire insulation intact (no cracking/melting)
Trailer electrical connection (7-way plug)

Interior Electrical Systems

Dashboard instruments operation
Warning lights functionality
Interior cabin lighting
Power outlets and USB ports
Horn operation (air and electric)

Inspector Certification

Overall Inspection Result:

Inspector Certification Number:

Digital Signature:

Click here to add digital signature

Additional Notes and Observations

Upload to Fleet Management