Download our Apps and get 14 Days Free Trial
Tire & Wheel Inspection Checklist for International LT625
Introduction
Tire and wheel inspections are critical safety procedures for International LT625 trucks, directly impacting vehicle performance, fuel efficiency, and road safety. This comprehensive checklist addresses all aspects of tire and wheel inspection including tire pressure monitoring, tread depth analysis, wheel alignment verification, and overall tire condition assessment. Proper tire maintenance on the LT625 not only ensures DOT compliance but also maximizes tire life, improves fuel economy, and prevents dangerous tire failures that could result in accidents or costly roadside emergencies.
The International LT625 is equipped with advanced tire pressure monitoring systems (TPMS) and sophisticated wheel configurations that require systematic inspection protocols. This detailed inspection checklist covers steer tires, drive tires, trailer interface considerations, wheel condition assessment, load capacity verification, and all related mounting hardware. Regular tire and wheel inspections help identify issues such as irregular wear patterns, improper inflation, wheel damage, and alignment problems before they compromise vehicle safety or lead to expensive tire replacements.
International LT625 Tire & Wheel Specifications
Understanding your LT625's tire and wheel specifications ensures proper inspection standards:
295/75R22.5 or 11R22.5
295/75R22.5 or 11R22.5
22.5" x 8.25" Standard
Load Index 144-146
100-110 PSI Typical
4/32" Steer, 2/32" Drive
Vehicle Information
Pro Tips for International LT625 Tire & Wheel Inspection
- TPMS System Utilization: The LT625's advanced Tire Pressure Monitoring System provides real-time pressure readings. Always verify TPMS readings with manual pressure checks as sensors can fail or provide inaccurate readings.
- Proper Pressure for Load: LT625 tire pressure requirements vary by load. Check manufacturer's load/inflation tables and adjust pressure based on actual vehicle weight and load distribution.
- Tread Depth Patterns: Look for irregular wear patterns that indicate alignment issues, suspension problems, or improper tire pressure. The LT625's weight distribution requires careful monitoring of steer tire wear.
- Temperature Considerations: Check tire pressure when tires are cold (not driven for 3+ hours). Hot tires can show 10-15 PSI higher pressure readings, leading to incorrect assessments.
- DOT Date Codes: LT625 operations often involve long distances. Check tire age using DOT date codes - tires over 6 years old may need replacement regardless of tread depth.
Steer Tires (Front Axle)
Drive Tires (Rear Axle)
Wheel Inspection
Tire Pressure Monitoring System (TPMS)
Tire Performance Analysis
Spare Tire & Equipment
Load & Weight Distribution
Environmental & Operating Conditions
Detailed Tire & Wheel Inspection Procedures
Follow these systematic procedures for comprehensive tire and wheel inspection of International LT625 trucks. These procedures ensure optimal tire performance and maximum safety.
Tire Pressure Verification Protocol
- Check tire pressure when tires are cold (3+ hours since operation)
- Use calibrated pressure gauge for accurate readings
- Compare TPMS readings with manual gauge measurements
- Adjust pressure based on current load using manufacturer tables
- Verify pressure in spare tire and dual tire inner positions
- Check valve stem condition and cap security
- Document pressure readings for trend analysis
Tread Depth Measurement Technique
- Use accurate tread depth gauge at multiple points
- Measure at three locations across tire width
- Check depth at multiple circumferential positions
- Record measurements for wear rate calculation
- Compare readings between dual tires and across axles
- Identify irregular wear patterns indicating problems
- Calculate remaining tire life based on wear rate
Wheel Condition Assessment
- Visually inspect wheel rim for cracks or damage
- Check lug nut torque with calibrated torque wrench
- Verify proper wheel mounting and hub contact
- Inspect wheel bearings for play or noise
- Check brake drum/rotor condition and clearance
- Examine grease seals for leakage or damage
- Measure wheel runout if vibration is suspected
TPMS System Diagnostic Check
- Verify TPMS system initialization at startup
- Check all sensor positions for active signals
- Compare TPMS readings with manual measurements
- Test low pressure warning system functionality
- Review sensor battery status and signal strength
- Update sensor IDs if tires have been rotated
- Document any system faults or warning codes
LT625 Tire Maintenance Guidelines
Proper tire maintenance extends tire life, improves fuel efficiency, and ensures optimal performance of your International LT625.
Daily Tire Maintenance
- Visual inspection of all tires for obvious damage
- Check TPMS readings and warning lights
- Remove debris from tread grooves
- Verify proper dual tire spacing
- Monitor tire temperatures after operation
- Check for signs of abnormal wear or damage
Weekly Tire Inspection
- Comprehensive pressure check with manual gauge
- Detailed tread depth measurements
- Sidewall inspection for cuts, cracks, or bulges
- Wheel condition and lug nut security check
- TPMS system functionality verification
- Spare tire condition and pressure check
Monthly Tire Service
- Tire rotation according to manufacturer schedule
- Wheel balance verification if vibration present
- Alignment check and adjustment if needed
- Load distribution analysis and documentation
- Tire wear rate calculation and trend analysis
- TPMS sensor battery status verification
Seasonal Tire Preparation
- Tire compound suitability for season review
- Pressure adjustment for temperature changes
- Tread pattern adequacy for road conditions
- UV protection and storage preparation
- Cold weather operational considerations
- Emergency equipment and tools verification
Tire & Wheel Inspection Progress
0% complete
Inspector Certification
Inspector Certification Statement
I certify that I have performed this tire and wheel inspection on the International LT625 and that all tires and wheels meet DOT safety requirements and manufacturer specifications. Any defects or safety concerns noted have been documented and will be addressed before vehicle operation.
Inspector signature and date
Tire & Wheel Defects and Maintenance Notes
Conclusion
Implementing this comprehensive Tire & Wheel Inspection Checklist for International LT625 trucks is essential for maintaining optimal tire performance, ensuring vehicle safety, and maximizing fuel efficiency. The LT625's advanced systems and long-haul capabilities demand systematic tire maintenance to prevent costly roadside failures and ensure reliable transportation operations.
For streamlined tire and wheel inspections and comprehensive fleet maintenance management, consider implementing the FleetRabbit APP designed specifically for commercial vehicle operations. The FleetRabbit platform provides digital inspection capabilities that automatically document tire conditions, track tire wear patterns, alert management to critical tire issues, and maintain detailed historical records for each International LT625 in your fleet. With FleetRabbit Software, fleet managers can easily monitor tire rotation schedules, track tire performance metrics, and ensure all LT625 trucks maintain superior tire safety and efficiency standards.
Make tire and wheel inspections an integral part of your International LT625 fleet management strategy with FleetRabbit's comprehensive solution. Whether for DOT compliance, operational efficiency, or preventive maintenance planning, this digital approach significantly improves inspection thoroughness and documentation while reducing administrative burden on drivers and maintenance personnel. The FleetRabbit system helps ensure your LT625 fleet maintains the highest standards of tire performance and road safety.
© 2025 Tire & Wheel Inspection Checklist for International LT625 | Developed by FleetRabbit | Contact us at support@fleetrabbit.com for customized tire inspection solutions.